Continental 4 Wheel Metal Drop Back container bins have been created to help avoid the health and safety risks associated with handballing bagged or bulky waste, often an essential requirement within retail and manufacturing environments or easy emptying mainly used by charity shops available with internal and external fork sleeve pockets and flap lid.

Taylor Mk2 4 Panel  1100 litre Drop Back Panel, Steel Bin Hot-Dipped Galvanised Steel along with internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste caught in exposed corners. Internally welded seams stop water penetration.

Highly Durable Galvanised Steel Body

Galvanised Steel Body, hot-dipped galvanised steel along with fully internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners.

Internally welded seams stop water penetration, preventing the corrosion that plagues less well-made metal waste containers. With full EN840 certification, they will give you exceptional lifetime value with limited downtime.
Steel-centred castor wheels manufactured with needle bearings, grease and rubber optimised for performance (we don’t offer plastic-centred castors)

Fully Internally welded seams prevent internal corrosion, whilst the hard-wearing galvanized steel body and base make for a durable, long-lasting container that delivers exceptional lifetime value.

The key benefits to owning continental recycling bins are they are completely durable, low maintenance, fire containment, long life, vandal proof and low cost of ownership compared to similar bins. The top frame is a complete welded tube, not split or open bend, with a diameter of 20mm. The use of the full welded tube is very important here, as by using a complete tube there are no holes or gaps in which waste can leak into the top frame itself when the container is lifted for emptying.

The Comb Bar is manufactured from a single piece of steel with welded end pieces and gussets.

1100 litre steel body, Hot-Dipped Galvanised Steel along with internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners. plagues less well-made metal waste containers. With full EN840 certification, they will give you exceptional lifetime value with limited downtime, unlike plastic and other alternative steel commercial trade waste bins.

Internally welded seams stop water penetration, preventing corrosion.

 All four castors are 200mm steel-centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release)

All four castors are Steel centred wheels manufactured with needle bearings, grease and rubber optimised for performance steel centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release) are bolted on for an easy replacement. Two foot operated, trailing braking wheels at the front with two swivel wheels at the back. (Not Welded On or Plastic Centred Castors)

Also available with Castors Options
Heavy Duty 20mm Casters: Mainly used with bins fitted with heavy duty base, suitable for dense waste materials (Food Waste) and for loading waste compactors and bins fitted with External and Internal fork pockets.

None marking castors are mainly used by Airports and Hotel lobbies, Schools, Hospitals, Offices, and Shopping Centres, which have none, marking floor Vinyl, Epoxy, or Laminate Floor covering.

Continental Towing 1100 litre containers are fully adapted and built with a heavy-duty reinforced base and heavy-duty Power castors and removable tow link system allowing up to 4 wheeled containers to be moved at a time subject to bin size and materials, ground conditions and material weights.

Bin Towing Containers provides a safe, practical answer to all towing requirements. Any container to be towed should be fitted with heavy-duty Power Towing castors or two swivel castors complete with directional locks, at one end of the container and no more than four containers are towed at any one time.

Heavy Duty Power Towing Castors  2 Swivel 2 Directional Lock is designed for towing up to 4 bins also the base is heavy-duty build 

Please note we would not recommend using standard castor's standard bin base for towing bins

Please contact us on 01709 730341 if you need more information on “Towing Guidelines” or Castor Options and technical advice.

Advantages Powder Coating: Continental Bin,

Powder Coating is a drying process created by an electric charge that causes a dry powder to fuse to the surface of the galvanised steel bin. Providing a layer of protection against corrosion, scratches/chipping, and fading, Being one of the most long-lasting superior paint finish, and colour-durable quality finishes. Which is then baked on through the High-Temperature Conveyor Drying System. Unlike a wet paint finish.

Different Lid Types & AperturesLids are Rotary-molded double-skin plastic with a minimum weight of 5.0 kilos manufactured in an aluminium mould for a superior finish with 12 Standard Colour Options.

Standard Trade Lid

Dimensions Duraflex Taylor MA4937 1100 Litre Trade Waste Lid 4 Wheel Bin Container lid Flat lid to fit Taylor,1100 . L: 932mm x W: 1239mm x H: 86mm With : 7 Ribs For Optimal Strength 

The innovative rotary moulded, double-skinned lid is waterproof and extra strong. 
Available in a range of colours.

Flap Lid
Dimensions Duraflex Taylor: ML1100RM-FLA 1100 Litre Recycling lid with plastic flap To fit Taylor, 1100 litre containers L: 934mm x W: 1240mm x H: 164mm Plastic Flap Aperture Size: W:500mm H:150mm: High Dome and Deep Ribbing Provides Exceptional Strength

Flap flap-opening lid is available in a wide choice of colours.

Lid Lock Options

  
Bespoke Logos Can Be Applied To Any Bin showing what can be correctly recycled

Logo Options

Effective use of a logo alongside an eye-catching paint scheme is a key aspect in the design of your bin and can convey a powerful brand image or message regarding container use. Personalise your containers with a complete range of Wrap logos or by adding bespoke logos,

For Further Information on the 1100 litre drop-back panel bin: Please Phone DJE On 01709-730341 Or Via the Contact Form.

Taylor Mk2 4 Panel 1100 Litre Drop Back Panel Dimension 

Mk4 1100L Litre drop back panel bin Further Build and Finish Options

DIN Lift Points, Central Locking Castors, Internal Fork Pockets, External Fork Pockets, Bin Embossing, Central Locking CastorsSuitable For Towing,