Taylor Mk4 770 4 Wheel Metal bin is available to Drop Back suitable panel handballing bagged or bulky waste, often an essential requirement within retail and manufacturing environments

770 Drop Back comes standard with a comb bar, lifting with a comb bar Drop Back Panel bin the lid is hinged at the front of the bin. 

Continental 770 litre, Drop Back Panel, Waste Disposal Steel Bin Hot-Dipped Galvanised Steel along with internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste caught in exposed corners. Internally welded seams stop water penetration.

Highly Durable Galvanised Steel Body

The Galvanised Steel Body, hot-dipped galvanised steel and fully internally welded seams ensure robust protection in the harshest of environments and protect the container from internal corrosion due to residual waste caught in exposed corners.

Internally welded seams stop water penetration, preventing the corrosion that plagues less well-made metal waste containers. Full EN840 certification will give you exceptional lifetime value with limited downtime.
Steel-centred castor wheels manufactured with needle bearings, grease and rubber optimised for performance (we don’t offer plastic-centred castors)

Fully Internally welded seams prevent internal corrosion, whilst the hard-wearing galvanized steel body and base make for a durable, long-lasting container that delivers exceptional lifetime value.

The key benefits to owning continental recycling bins are they are completely durable, low maintenance, fire containment, long life, vandal proof and low cost of ownership compared to similar bins.

Galvanised Steel Panels Front, Rear and Side Panels are constructed from 1.5mm Mild Steel Swages between 2 to 7mm and panels have a bowed-out geometry to spring out under heavy loads.

The top frame is a complete welded tube, not split or open bend, with a diameter of 20mm. The use of the complete welded tube is very important here, as by using a complete tube there are no holes or gaps in which waste can leak into the top frame itself when the container is lifted on emptying but not available on a drop front panel bin.

The Comb Bar is manufactured from a single piece of steel with welded end pieces and gussets. not available on a 770-litre drop front panel bin.

770 steel body, Hot-Dipped Galvanised Steel along with internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners. plagues less well-made metal waste containers. With full EN840 certification, they will give you exceptional lifetime value with limited downtime, unlike plastic and other alternative steel commercial trade waste bins.

Internally welded seams stop water penetration, preventing corrosion.

All four castors are 200mm or 160mm steel-centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release)

All four castors are Steel centred wheels manufactured with needle bearings, grease and rubber optimised for performance steel centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release) are bolted on for an easy replacement. It is two-foot-operated, with trailing braking wheels at the front and two swivel wheels at the back. (Not Welded On or Plastic Centred Castors)

Also available with Castors Options
Heavy Duty 20mm Casters: Mainly used with bins fitted with heavy duty base, suitable for dense waste materials (Food Waste) and also for loading waste compactors and bins fitted with External fork pockets.

None marking castors are mainly used by Airports and Hotel lobbies, Schools, Hospitals, Offices, and Shopping Centres, which have none, marking floor Vinyl, Epoxy, or Laminate Floor covering.

Continental Towing containers are fully adapted and built with a heavy-duty reinforced base and heavy-duty Power castors and removable tow link system allowing up to 4 wheeled containers to be moved at a time subject to bin size and materials, ground conditions and material weights.

Bin Towing Containers provides a safe, practical answer to all towing requirements. Any container which is to be towed should be fitted with heavy-duty Power Towing castors or two swivel castors complete with directional locks, at one end of the container and no more than four containers are towed at any one time.

Heavy Duty Power Towing Castors  2 Swivel 2 Directional Lock is designed for towing up to 4 bins also the base is heavy-duty built.

Lids are Rotary-molded double-skin plastic with a minimum weight of 5.0 kilos manufactured in an aluminium mould for a superior finish.
Recycling Flap Lid

Designed for paper or plastics recycling. The flap-opening lid is available in a wide choice of colours
Advantages Powder Coating: Continental Bin,
The container is powder powder-coated option using polyester powder, which is baked and cured in a controlled oven process Providing a layer of protection against corrosion, scratches/chipping, and fading, It is one of the most long-lasting superior paint finishes and has colour-durable quality finishes. Which is then baked on through the High-Temperature Conveyor Drying System. Unlike a wet paint finish.

For Further Information on the Mk4 770 Drop Back Panel Waste Bin: Please Phone DJE At 01709-730341 Or Via the Contact Form

Drawing Showing Dimensions 770L with a drop-down back panel 

 
  Bin Compliances:  

• Double tank method as dictated by European Standard BS EN 840  
• Quality Control Certification to BS EN ISO 9001:2000
• Bin comply in full with European Standard BS EN 840
• Certification to Environmental Standard BS EN ISO 14001
• Recycling bins comply in full with ‘The Noise and Emission in the Environment by Equipment for Use Outdoors Regulation 2001’. BSENISO3744:1985 
• Hot-dip galvanised to meet BS EN 1461: 2009
• Bin body steel, all joints fully welded with all internal body seams continuously welded. All steel parts are galvanised after manufacture to meet BS 729.
• Galvanised steel body with internal fully welded seams
  

  Web Page Disclaimer: (All Images and Colour Charts are for guild line purposes)