DJE RECYCLING SYSTEMS. SPECIALIST SUPPLIERS.TAYLOR 4 WHEEL GALVANISED STEEL METAL BINS: 46 BUILD VARIANTS, UN APPROVED CLINICAL WASTE BINS, TRADE WASTE BINS, BOTTLE RECYCLING BINS, GENERAL WASTE BINS, FOOD WASTE RECYCLING BINS, CHAMBERLAIN WASTE BINS, DOMESTIC WASTE BINS, GREEN WASTE RECYCLING  BINS, PAPER RECYCLING BINS, PLASTIC RECYCLING BINS, WEEE BIN, DUO SPLIT BIN, DROP FRONT or DROP BACK PANEL BINS, HIGH-SPEED TOWING BINS, INTERNAL FORK POCKETS, EXTERNAL FORK POCKETS, FOOT OPERATED LID OPTION, TAYLOR GALVANISED STEEL 4 WHEEL BINS, TRADE WASTE, RECYCLING BINS, DURAFLEX LIDS, TRADE LIDS, HIGH DOME RECYCLING FLAP LIDS, 2 APERTURE BOTTLE RECYCLING LIDS,3 LID LOCK OPTIONS, STANDARD HANDLES, DANISH HANDLES,200mm STEEL CENTRED BOLT ON CASTORS,4 OPTIONS, TELEPHONE:01709 730341 :Email:info@djerecyclingsystems.com:

«»
1 METAL 1 1280 TRADE BIN
1 METAL 2 1280 RECYCLING BIN
1 METAL 3 1280 BOTTLE BIN

Taylor Mk2 1280L

The Taylor Mk2  1280L  offers several advantages compared to other bins. For example, the capacity of 1280 is significantly increased over an 1100-litre bin while sitting in the same footprint. This allows you to collect more waste without taking up any more street space. It also means that less frequent collections are needed which allows significant fuel savings and reduced CO2 emissions. As a result, more and more Local Authorities are switching from 1100L to 1280L bins to maximise efficiency and save on CO2 emissions and fuel.

Steel Bin Hot-Dipped Galvanised Steel along with internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners. Internally welded seams stop water penetration.

The top frame is a complete welded tube, not split or open bend, with a diameter of 20mm. The use of the complete welded tube is very important here, as by using a complete tube there are no holes or gaps in which waste can leak into the top frame itself when the container is lifted on emptying.1280 steel body, Hot-Dipped Galvanised Steel along with internally welded seams ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste be caught in exposed corners.

Internally welded seams stop water penetration, preventing the corrosion that plagues less well-made metal waste containers. With full EN840 certification, they will give you exceptional lifetime value with limited downtime, unlike plastic and other alternative steel commercial trade waste bins.
Internally welded seams stop water penetration, preventing the corrosion that plagues less well-made metal waste containers.
Benefits 1280 Continental Bin

  • 1280L Galvanised Steel Body, hot-dipped galvanised steel along with fully internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners.
    Steel Panels Front, Rear and Side Panels are constructed from 1.5mm Mild Steel 
  • The container can be powder-coated option using polyester powder, which is baked and cured in a controlled oven process providing a layer of protection against corrosion, scratches/chipping and fading, being one of the most long-lasting superior paint finishes, and colour-durable quality available in 12 standard colours
  • The Comb Bar is manufactured from a single piece of steel with welded end pieces and gussets.
  • The top frame is a complete welded tube, not split or open bend, with a diameter of 20mm. The use of the complete welded tube is very important here, as by using a complete tube there are no holes or gaps in which waste can leak into the top frame itself when the container is lifted on emptying
  • Container Bin Lids are Rotary-moulded double skin plastic with a minimum weight of 5.0 kilo manufactured in an aluminium mould for superior finish 12 Standard Colour Options.
  • Container Bin Lid Options
  • Standard Trade Lid
  • 2 Aperture Bottle Brush Lid
  • Recycling Flap Lid
  • Bolt on Castor Options for easy replacement
  • Standard 200mm Steel Centred Castors
  • Heavy Duty 200m Castors
  • 200mm High Speed Towing Castors
  • None Marking 200mm Castors


All four castors are 200mm steel-centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release)

All four castors are 200mm steel-centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release)
Also available with Castors Options

Taylor Mk2 1280 Litre Towing containers are fully adapted and built with a heavy-duty reinforced base and heavy-duty Power castors and removable tow link system allowing up to 4 wheeled containers to be moved at a time subject to bin size and materials, ground conditions and material weights.
Bin Towing Containers provide a safe, practical answer to all towing requirements. Any container which is to be towed should be fitted with heavy-duty Power Towing castors or two swivel castors complete with directional locks, at one end of the container and that no more than four containers are towed at any one time.
Please note we would not recommend using standard castors for towing up to 4 bins

Advantages Powder Coating: Taylor Continental Bin,
Powder Coating is a drying process created by an electric charge that causes a dry powder to fuse to the surface of the galvanised steel bin. Providing a layer of protection against corrosion, scratches/chipping and fading, Being one of the most long-lasting superior paint finishes, and colour-durable quality finishes. 

DuraFlex lids are up to 4 times lighter than metal lids, thereby considerably reducing the risk of accidents to waste operatives and members of the public.
DuraFlex lids are impervious to water and climatic influences. They are maintenance-free and fundamentally easier to replace when damaged.
Available in 12 Standard Colours 


Standard Trade Lid

Dimensions Duraflex Taylor MA4937 1280 Litre Trade Waste 4 Wheel Bin Container lid Flat lid to fit Taylor,1280 . L: 932mm x W:1 239mm x H: 86mm With : 7 Ribs For Optimal Strength 

Recycling Flap Lid

Dimensions Duraflex Taylor: ML1100RM-FLA 1280 Litre Recycling lid with plastic flap To fit Taylor, 1280 litre containers L: 934mm x W: 1240mm x H: 164mm Plastic Flap Aperture Size: W: 500mm H: 150mm: High Dome and Deep Ribbing Provides Exceptional Strength

The Recycling Flap Lid is Designed for paper or plastics recycling. The flap-opening lid is available in a wide choice of colours from our range. Fitted with Flap Lid-Suitable for Recycling: Mixed Dry Recyclables Paper recycling - dry paper waste, newspapers, office paper and magazines. Cardboard  corrugated cardboard, cereal boxes and card, Metal cans  clean, empty drinks cans and food tins Plastic – packaging films, empty drinks bottles, rinsed out milk bottles, clean salad trays, rinsed out microwaveable meal trays, margarine  tubs, glass jars, glass bottles NOT FOOD WASTE or None Recyclables Materials and Single-use Plastics,

1280 Brush Lid

Dimensions Duraflex Taylor: ML1100RM-BSA 1280 Litre Recycling lid with brushes To fit Taylor, L: 934mm x W:1240mm H: 164mm x 2 175mm Brush Diameter: High Dome and Deep Ribbing Provides Exceptional Strength

Bespoke Vinyl Graphics: Can Be Applied To Any Bin showing what can be correctly recycled

  

For Further Information on the 1280 Litre General Waste Bin: Please Phone DJE On 01709-730341 Or Via the Contact Form


Technical Drawing: Taylor Mk2 1280 L litre bin

1280L Bin Options
DIN points
Custom Embossing
Central Locking Castors
Internal fork pockets
External Fork Pockets
Drain plug options
Sound Deadening

Bin Compliances:  

  • Double tank method as dictated by European Standard BS EN 840  
  • Quality Control Certification to BS EN ISO 9001:2000
  • Bin comply in full with European Standard BS EN 840
  • Certification to Environmental Standard BS EN ISO 14001
  • Recycling bins comply in full with ‘The Noise and Emission in the Environment by Equipment for use Outdoors Regulation 2001’. BSENISO3744:1985 
  • Hot-dip galvanised to meet BS EN 1461: 2009
  • Bin body steel, all joints fully welded with all internal body seams continuously welded. All steel parts are galvanised after manufacture to meet BS 729.
  • Galvanised steel body with internal fully welded seams
  • Castors Compliant with EN









Specialist 4 Wheel Metal Bins