The The 
Taylor 820-litre 4-wheel Metal Clinical Waste Bin is ideal for your medium to large collections where space is limited. With the same footprint as our 770, the sump base creates extra storage capacity while retaining the same superb towing capability. It features internal seams, a galvanised steel body, 200mm black rubber steel-centred castors, a heavy-duty metal base, standard V Lock, and the ultimate medical waste bin.

Standard Build: 820 Litres Galvanised. Steel Clinical Waste Recycling Bin with Internally Welded Seams, Welded-On Comb Bar, EN840 Side Handles. EN840 compliant, internally seam-welded Hot dip galvanised body, Welded comb bar, X 4 200mm Steel Centred Bolt On Castors For Easy Replacement, X 2 Foot Operated Standard Side Braked Castors X 2 Swivel Rear Castors Fitted with Yellow Duraflex Trade Lid, Lid Lock. Prices from: £469.00 Excluding VAT. (12 Month Warranty) Delivery Time 2-4  Working Weeks

With internal seams and a galvanised steel body with 200mm black rubber steel-centred castors, a heavy-duty metal base, standard V Lock, the ultimate medical waste container with a large capacity solution for clinical waste from hospitals, surgeries, care homes, clinics, dentists and Pharmaceutical Businesses. 

Image 820L For Guild Line Purposes
Galvanised Steel Shell
Seam Welded Internally
Height 1370mm
Depth 780mm
Width 1250mm
S.W.L 328Kg
Standard Handles
Welded Comb Bar
Standard Drain Plug
X4 Steel Centred 200mm Castors
2 Rear Swivel Castors, Front Foot Operated Locking Castors
3 Duraflex Lid Options
See Drawing At the Bottom Of the Page

Galvanised Steel Body

Internally welded seams stop water penetration, preventing the corrosion that plagues less well-made metal waste containers. With full EN840 certification, they will give you exceptional lifetime value with limited downtime.

 Steel-centred castor wheels manufactured with needle bearings, grease and rubber optimised for performance (we don’t offer plastic-centred castors)

The top frame is a complete welded tube, not split or open-bend, with a diameter of 20mm. The use of the complete welded tube is very important here, as by using a complete tube, there are no holes or gaps in which waste can leak into the top frame itself when the container is lifted on emptying.

The Comb Bar is manufactured from a single piece of steel with welded end pieces and gussets.

820 Litre steel body, Hot-Dipped Galvanised Steel, along with internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners.

All four castors are 200mm  steel-centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are foot-press to lock, press to release)

All four castors are 200mm steel-centred wheels manufactured with needle bearings, grease, and rubber optimised for performance. Steel-centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are pressed to lock, pressed to release), are bolted on for easy replacement. Two-foot operated, trailing braking wheels at the front with two swivel wheels at the back. (Not Welded On or Plastic Centred Castors)

Caster Options

Heavy Duty 200mm Casters: Mainly used with bins fitted with a heavy-duty base, suitable for dense waste materials (Food Waste) and for loading waste compactors and bins fitted with External fork pockets.

Non-marking casters are mainly used by Hospitals, which have non-marking floor Vinyl, Epoxy, and Laminate Floor covering.

Continental Towing containers are fully adapted and built with a heavy-duty reinforced base and heavy-duty Power castors and a removable tow link system, allowing up to 4 wheeled containers to be moved at a time, subject to bin size and materials, ground conditions and material weights.

Heavy Duty Power Towing Castors  2 Swivel 2 Directional Lock is designed for towing up to 4 bins and also comes standard with a heavy-duty base, including a bolt-on towing hitch and eye.

Bin Towing Containers provide a safe, practical answer to all towing requirements. Any container which is to be towed should be fitted with heavy-duty Power Towing castors or two swivel castors complete with directional locks, at one end of the container, and no more than 4 containers are towed at any one time.

Don't hesitate to get in touch with us on 01709 730341 if you need more information on “Towing Guidelines” or Castor Options and technical advice.

Advantages of Powder Coating: Taylor Continental Bin,

The clinical container is a powder-coated yellow using polyester powder, which is baked and cured in a controlled oven process. Providing a layer of protection against corrosion, scratches/chipping and fading, being one of the most long-lasting, superior paint finishes, and colour-durable quality finishes. Which is then baked on through the High-Temperature Conveyor Drying System.

Duraflex  Lids
Taylor-DuraFlex lids are up to 4 times lighter than metal lids, thereby considerably reducing the risk of accidents to waste operatives and members of the public.
The lightweight construction of DuraFlex lids, made from high-grade UV-stabilised polyethene, gives the same stability as heavier metal lids.
A rotomoulded DuraFlex lid can be bent or crushed several times and still revert to its original shape.
Different Lid Types & Apertures suitable for clinical medical waste
Standard 820 Yellow Lid

820 Recycling Flap Lid Yellow

820 Litre Clinical waste bin. Please get in touch with us at 01709 730341 if you need more information on the Lid Options, or Castor Options and technical advice. Or via the Enquiry link

The Continental 820 Litre Build and Finish Options
DIN Lift Points For Side Loading, Central Locking Castors, External Fork Pockets, Bin Embossing, Danish Handles,

820L Bin Dimensions

Bin Compliance:  

• Double tank method as dictated by European Standard BS EN 840  
• Quality Control Certification to BS EN ISO 9001:2000
• Bin comply in full with European Standard BS EN 840
• Certification to Environmental Standard BS EN ISO 14001
• Recycling bins comply in full with ‘The Noise and Emission in the Environment by Equipment for use Outdoors Regulation 2001’. BSENISO3744:1985 
• Hot-dip galvanised to meet BS EN 1461: 2009
• Bin body steel, all joints fully welded with all internal body seams continuously welded. All steel parts are galvanised after manufacture to meet BS 729.
• Galvanised steel body with internal fully welded seams