The Continental Cage Bin has been designed with preventing contamination in mind. The cage sides are designed to allow for clear visibility of waste held inside the container. The Continental 1100L Cage will give you exceptional lifetime value with limited downtime, unlike plastic and other alternative steel commercial trade bins. This Means Continental bins keep working, even under the toughest conditions.

Taylor 1100 Cage Steel Bin Hot-Dipped Galvanised Steel along with internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners. Internally welded seams stop water penetration.

Galvanised Steel Panels Front, Rear and Mesh Side Panels are constructed from 1.5mm Mild Steel Swages between 2 to 7mm and panels have a bowed-out geometry to spring out under heavy loads.

The top frame is a complete welded tube, not split or open bend, with a diameter of 20mm. The entire welded tube is essential here, as by using a complete tube there are no holes or gaps in which waste can leak into the top frame itself when the container is lifted on emptying.

1100 steel cage body, Hot-Dipped Galvanised Steel along with internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners.
Internally welded seams stop water penetration, preventing corrosion.

All four castors are 200mm Steel centred wheels manufactured with needle bearings, grease, and rubber optimised for performance steel-centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release) are bolted on for an easy replacement. Two-foot operated, trailing braking wheels at the front with two swivel wheels at the back. (Not Welded On or Plastic Centred Castors)

Also available with Castors Options please phone DJE on 01709-730341 to discuss bin castor variants 

Advantages Powder Coating: Taylor Continental Bin,
The container is powder-coated option using polyester powder, which is baked and cured in a controlled oven process Providing a layer of protection against corrosion, scratches/chipping and fading, Being one of the most long-lasting superior paint finishes, and colour-durable quality finishes.


Lids are Rotary-molded double skin plastic with a minimum weight of 5.0 kilo manufactured in an aluminium mould for superior finish 15 Standard Colour Options.

MK4 1100 Duraflex Trade Lid
Dimensions Duraflex Taylor MA4937 1100 Litre Trade Waste Lid 4 Wheel Bin Container lid Flat lid to fit Taylor,1100 . L: 932mm x W: 1239mm x H: 86mm With : 7 Ribs For Optimal Strength 

Dimensions Duraflex Taylor: ML1100RM-FLA 1100 Litre Recycling lid with plastic flap To fit Taylor, 1100 litre containers L: 934mm x W: 1240mm x H: 164mm Plastic Flap Aperture Size: W:500mm H:150mm: High Dome and Deep Ribbing Provides Exceptional Strength

Bespoke Logos Can Be Applied To Any Bin showing what can be correctly recycled
Logo Options Effective use of a logo alongside an eye-catching paint scheme is a key aspect in the design of your bins and can convey a powerful brand image or message regarding container use. Personalise your containers with a complete range of Wrap logos or by adding bespoke logos,

  

For Further Information on the 1100 Litre Cage Sided Bin: Please Phone DJE At 01709-730341 Or Via the Contact Form



1100 Litre Cage Bin Dimensions 

Bin Compliances:  

• Double tank method as dictated by European Standard BS EN 840  
• Quality Control Certification to BS EN ISO 9001:2000
• Bin comply in full with European Standard BS EN 840
• Certification to Environmental Standard BS EN ISO 14001
• Recycling bins comply in full with ‘The Noise and Emission in the Environment by Equipment for Use Outdoors Regulation 2001’. BSENISO3744:1985 
• Hot-dip galvanised to meet BS EN 1461: 2009
• Bin body steel, all joints fully welded with all internal body seams continuously welded. All steel parts are galvanised after manufacture to meet BS 729.
• Galvanised steel body with internal fully welded seams
• Castors Compliant with EN840