Continental 1280 – 1100-820-770-700-660-500 litre 4 wheel metal bin suitable for glass bottles and plastic bottles recycling bin comes standard with heavy duty base and 2 aperture bush lid, suitable for, Hospitality, Restraints, Pubs, Hotels, Shopping Centres…. With option dBin, sound-deadening has been specifically designed to reduce the amount of noise created when recycling glass in a steel Continental bin/container. Glass recycling often poses a problem because of the loud noises created when putting glass material into the bins. This can create an issue especially when the bins are situated in built-up urban areas where the noise can easily irritate nearby residents.
Continental dBin has been specifically designed to reduce the amount of noise created when recycling glass in steel continental containers.

• Galvanised Steel Body, hot-dipped galvanised steel along with fully internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners.
  Steel Panels Front, Rear and Side Panels are constructed from 1.5mm Mild Steel Swages are between 2 to 7mm and panels have a bowed-out geometry to spring out under heavy loads
• The container can be powder-coated option using polyester powder, which is baked and cured in a controlled oven process providing a layer of protection against corrosion, scratches/chipping and fading, being one of the most long-lasting superior paint finishes, and colour-durable quality available in 12 standard colours
• The Comb Bar is manufactured from a single piece of steel with welded end pieces and gussets.
• The top frame is a complete welded tube, not split or open bend, with a diameter of 20mm. The use of the complete welded tube is very important here, as by using a complete tube there are no holes or gaps in which waste can leak into the top frame itself when the container is lifted on emptying
• Container Bin Lids are Rotary-moulded double skin plastic with a minimum weight of 5.0 kilo manufactured in an aluminium mould for superior finish 12 Standard Colour Options.
• Container Bin Lid Options
• Standard Trade Lid
• 2 Aperture Bottle Brush Lid
• Recycling Flap Lid
• Bolt on Castor Options for easy replacement
• Standard 200mm Steel Centred Castors
• Heavy Duty 200m Castors
• 200mm High Speed Towing Castors Heavy Duty Power Towing Castors 2 Swivel 2 Directional Lock is designed for towing up to 4 bins also the base is heavy-duty built and fitted with bolt on hitch and towing eye.
• None Marking 200mm Castors also available with none marking towing castors.

Please Hover over the Bottle Recycling Bin which you could be interested in and it will redirect you to the page showing the full specifications of the bin

      
Glass recycling often poses a problem because of the loud noises created when putting glass material into the bins. This can create an issue especially when the bins are situated in built-up urban areas where the noise can easily irritate nearby residents or hotel residents.

Continental dBin has been proven to be an impressive 22 decibels quieter when tested against a standard bin with no lining at all, which is a significant improvement.
The Continental works by fitting a felt-type lining which works as material insulation into the bin and provides a ‘sound-deadening effect. The lining can be treated so that it is fully waterproof and robust ensuring that it will last for a considerable amount of time.

Continental Bottle Recycling Bins, Steel Bin Hot-Dipped Galvanised Steel along with internally welded seams, ensure robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners. Internally welded seams stop water penetration.

Highly Durable Galvanised Steel Body

Galvanised Steel Body, hot-dipped galvanised steel along with fully internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners.

Internally welded seams stop water penetration, preventing the corrosion that plagues less well-made metal waste containers. With full EN840 certification, they will give you exceptional lifetime value with limited downtime.
Steel-centred castor wheels manufactured with needle bearings, grease and rubber optimised for performance (we don’t offer plastic-centred castors)

Fully Internally welded seams prevent internal corrosion, whilst the hard-wearing galvanized steel body and base make for a durable, long-lasting container that delivers exceptional lifetime value.

The key benefits to owning continental recycling bins are they are completely durable, low maintenance, fire containment, long life, vandal proof and low cost of ownership compared to similar bins.

Galvanised Steel Panels Front, Rear and Side Panels are constructed from 1.5mm Mild Steel Swages between 2 to 7mm, and panels have a bowed-out geometry to spring out under heavy loads.

The top frame is a complete welded tube, not split or open bend, with a diameter of 20mm. The use of the complete welded tube is very important here, as by using a complete tube there are no holes or gaps in which waste can leak into the top frame itself when the container is lifted on emptying.

The Comb Bar is manufactured from a single piece of steel with welded end pieces and gussets.

Bottle Recycling Brush Lid

Recycling Bottle 2 Aperture Brush Lid
DuraFlex lids are up to 4 times lighter than metal lids, thereby considerably reducing the risk of accidents to waste operatives and members of the public.
The lightweight construction of lids, made from high-grade UV-stabilised polyethylene, gives the same stability as heavier metal lids.

Lid Colour Options:
Black, Blue, Brown, Dark Blue, Dark Grey, Green, Moss Green, Orange, Standard Grey, Standard Red, White, Yellow

The two-aperture brush entry port lid is ideal for glass, cans, and plastic bottle recycling. 

 For Further Information regarding bottle recycling bins: Please Phone DJE At 01709-730341 Or Via the Contact Form