DJE RECYCLING SYSTEMS. SPECIALIST SUPPLIERS.TAYLOR 4 WHEEL GALVANISED STEEL METAL BINS: 46 BUILD VARIANTS, UN APPROVED CLINICAL WASTE BINS, TRADE WASTE BINS, BOTTLE RECYCLING BINS, GENERAL WASTE BINS, FOOD WASTE RECYCLING BINS, CHAMBERLAIN WASTE BINS, DOMESTIC WASTE BINS, GREEN WASTE RECYCLING  BINS, PAPER RECYCLING BINS, PLASTIC RECYCLING BINS, WEEE BIN, DUO SPLIT BIN, DROP FRONT or DROP BACK PANEL BINS, HIGH-SPEED TOWING BINS, INTERNAL FORK POCKETS, EXTERNAL FORK POCKETS, FOOT OPERATED LID OPTION, TAYLOR GALVANISED STEEL 4 WHEEL BINS, TRADE WASTE, RECYCLING BINS, DURAFLEX LIDS, TRADE LIDS, HIGH DOME RECYCLING FLAP LIDS, 2 APERTURE BOTTLE RECYCLING LIDS,3 LID LOCK OPTIONS, STANDARD HANDLES, DANISH HANDLES,200mm STEEL CENTRED BOLT ON CASTORS,4 OPTIONS, TELEPHONE:01709 730341 :Email:info@djerecyclingsystems.com:

«»
3 METAL 1 820 TRADE BIN
3 METAL 2 820 RECYCLING BIN
3 METAL 3 820 BOOTLE BIN
3 BAN 3
9 BAN 3

The Continental® 820 is ideal for your medium to large collection needs where space is limited.
The Continental 820-litre General Waste Bin is ideal for your medium to large collections where space is limited. With the same footprint as our 770, the sump base creates extra storage capacity whilst retaining the same superb towing capability as the smaller model. Internally welded seams prevent internal corrosion, whilst the hard-wearing galvanised steel body and base make for a durable, long-lasting container that delivers exceptional lifetime value when compared to plastic or alternative steel containers.

  • 820L Galvanised Steel Body, hot-dipped galvanised steel along with fully internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners.
    Steel Panels Front, Rear and Side Panels are constructed from 1.5mm Mild Steel Swages are between 2 to 7mm and panels have a bowed out geometry to spring out under heavy loads
  • The container can be powder-coated option using polyester powder, which is baked and cured in a controlled oven process providing a layer of protection against corrosion, scratches/chipping and fading, being one of the most long-lasting superior paint finishes, and colour-durable quality available in 12 standard colours
  • The Comb Bar is manufactured from a single piece of steel with welded end pieces and gussets.
  • The top frame is a complete welded tube, not split or open bend, with a diameter of 20mm. The use of the complete welded tube is very important here, as by using a complete tube there are no holes or gaps in which waste can leak into the top frame itself when the container is lifted on emptying
  • Container Bin Lids are Rotary-moulded double skin plastic with a minimum weight of 5.0 kilo manufactured in an aluminium mould for superior finish 12 Standard Colour Options.
  • Container Bin Lid Options
  • Standard Trade Lid
  • 2 Aperture Bottle Brush Lid
  • Recycling Flap Lid
  • Bolt on Castor Options for easy replacement
  • Standard 200mm Steel Centred Castors
  • Heavy Duty 200m Castors
  • 200mm High Speed Towing Castors
  • None Marking 200mm Castors


All four castors are 200mm steel-centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release)

Also available with Castors Options

Continental Towing containers are fully adapted and built with a heavy-duty reinforced base and heavy-duty Power castors and removable tow link system allowing up to 4 wheeled containers to be moved at a time subject to bin size and materials, ground conditions, and material weights.

Bin Towing Containers provide a safe, practical answer to all towing requirements. Any container which is to be towed should be fitted with heavy-duty Power Towing castors or two swivel castors complete with directional locks, at one end of the container and that no more than four containers are towed at any one time.

Please note we would not recommend using standard castors and standard bin base  for towing up to 4 bins

Advantages Powder Coating: Taylor Continental Bin,
Powder Coating is a drying process created by an electric charge that causes a dry powder to fuse to the surface of the galvanised steel bin.
Providing a layer of protection against corrosion, scratches/chipping, and fading,
Being one of the most long-lasting superior paint finishes, and colour-durable quality finishes. Which is then baked on through the High-Temperature Conveyor Drying System. Unlike a wet paint finish.

DuraFlex lids are up to 4 times lighter than metal lids, thereby considerably reducing the risk of accidents to waste operatives and members of the public.
DuraFlex lids are impervious to water and climatic influences. They are maintenance-free and fundamentally easier to replace when damaged.
Available in 12 Standard Colours

Duraflex Taylor Lids, The lightweight construction of DuraFlex lids, manufactured from high-grade UV-stabilised polyethylene, gives the same stability as heavier metal lids.
A rotomoulded DuraFlex lid can be bent or crushed several times and still revert to its original shape.


Dimensions Duraflex Taylor -MA4929 Trade Waste 4 Wheel Bin Container lid Flat lid to fit Taylor 820 litre bin 820 litre bin. L: 737mm x W: 1237mm x H: 81mm

Bespoke Logos Can Be Applied To Any Bin showing what can be correctly recycled
  

For Further Information on the 820 Litre General Waste Bin: Please Phone DJE At 01709-730341 Or Via the Contact Form

820 Litre Bin Dimensions 








Specialist 4 Wheel Metal Bins